跳至內容
測試伺服器
開發伺服器

Device Temperature#

Device Temperature camera feature 允許您測量相機內不同位置的溫度，例如核心板、Ethernet PHY 組件（如適用）、感測器板或相機外殼。

使用 Temperature State 功能（如適用）來判定相機目前的內部溫度狀態。

使用此功能#

Determining the Device Temperature#

若要測量 Device Temperature：

  1. 如果已啟用 DeviceTemperatureSelector 參數可用時，請將該參數設定為所需的測溫位置，例如： Sensor.
  2. 取得 DeviceTemperature 參數的值。

溫度以攝氏度數的浮點數值表示。

範例程式碼#

ace 2、boost 和 dart R 相機#
// Set the measuring location to sensor
camera.DeviceTemperatureSelector.SetValue(DeviceTemperatureSelector_Sensor);
// Get the current device temperature
double d = camera.DeviceTemperature.GetValue();

INodeMap& nodemap = camera.GetNodeMap();
// Set the measuring location to sensor
CEnumParameter(nodemap, "DeviceTemperatureSelector").SetValue("Sensor");
// Get the current device temperature
double d = CFloatParameter(nodemap, "DeviceTemperature").GetValue();

// Set the measuring location to sensor
camera.Parameters[PLCamera.DeviceTemperatureSelector].SetValue(PLCamera.DeviceTemperatureSelector.Sensor);
// Get the current device temperature
double d = camera.Parameters[PLCamera.DeviceTemperature].GetValue();

/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
double d = 0;
/* Set the measuring location to sensor */
errRes = PylonDeviceFeatureFromString(hdev, "DeviceTemperatureSelector", "Sensor");
CHECK(errRes);
/* Get the current device temperature */
errRes = PylonDeviceGetFloatFeature(hdev, "DeviceTemperature", &d);
CHECK(errRes);

# Set the measuring location to sensor
camera.DeviceTemperatureSelector.Value = "Sensor"
# Get the current device temperature
d = camera.DeviceTemperature.Value
ace Classic/U/L GigE 相機#
// Get the current device temperature
double d = camera.TemperatureAbs.GetValue();

INodeMap& nodemap = camera.GetNodeMap();
// Get the current device temperature
double d = CFloatParameter(nodemap, "TemperatureAbs").GetValue();

// Get the current device temperature
double d = camera.Parameters[PLCamera.TemperatureAbs].GetValue();

/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
double d = 0;
/* Get the current device temperature */
errRes = PylonDeviceGetFloatFeature(hdev, "TemperatureAbs", &d);
CHECK(errRes);

# Get the current device temperature
d = camera.TemperatureAbs.Value
其他相機#
// Get the current device temperature
double d = camera.DeviceTemperature.GetValue();

INodeMap& nodemap = camera.GetNodeMap();
// Get the current device temperature
double d = CFloatParameter(nodemap, "DeviceTemperature").GetValue();

// Get the current device temperature
double d = camera.Parameters[PLCamera.DeviceTemperature].GetValue();

/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
double d = 0;
/* Get the current device temperature */
errRes = PylonDeviceGetFloatFeature(hdev, "DeviceTemperature", &d);
CHECK(errRes);

# Get the current device temperature
d = camera.DeviceTemperature.Value

您也可以使用 pylon Viewer 來輕鬆設定參數。